Living Jackson

Benefits of cycling
Fixie Bikes | EighthInch Evanston NuVinci | Shifter Cable Routing

Fixie Bikes | EighthInch Evanston NuVinci | Shifter Cable Routing


Howdy, going to show you the cable routing
for the NuVinci bike, the evananston. What we have in mind. So both cables come out of
the shifter in their housing. Proper amount of cable. Its not going to cross the head
tube so just starts routing immediately down the down-tube. Its going to go down a tube
side by side housing stops that are not directly under the down tube. A little offset to the
right side of the bike. The housing will stop here and it will be exposed to the shifter
cable length of the down tube with some rubber grommets to protect the frame. Similar setup
down here with a side-by-side housing stops. Housing starts again here. One of the housings
will go above the bottom bracket and into a housing stop on the chain-stay, the other
cable housing will be opposite, going underneath the bottom bracket into a housing stop on
the bottom of the chain-stay. Shifter cable will be exposed once again on the chain-stay
and housing will start again about three inches from the dropout. Some housing stops there
and then the housing continues on into the NuVinci hub. EIGHTHINCH http://eighthinch.com fixed gear bikes

1 comment on “Fixie Bikes | EighthInch Evanston NuVinci | Shifter Cable Routing

  1. how do i make nuvinci have fixed gear, want to build a mid drive electric with electronic breaks and crank freewheel

Leave a Reply

Your email address will not be published. Required fields are marked *