INSTALL REAR BMX WHEEL LIKE A PRO
3…2…1…. Pull wheel so that chain is tight, and tighten the axle nut as shown. Tighten drive-side axle nut. (chain will be “too tight” at this point, but don’t worry) Now loosen this nut and the wheel should fall into place perfectly. Chain should now have the perfect amount of tension.. Tighten it right back up, and you’re DONE! Again, pull wheel so chain is taught, and tighten non-drive axle nut. Tighten drive-side axle nut Loosen non-drive side, and everything falls into place. Tighten, and you’re done. Leave a like if this helped you, and subscribe if you’d like to stay notified of new uploads. THANKS! GORIDE See? Nice and straight 🙂 Chain is perfect 🙂 I’m not lying to you. LOOK! It’s perfectly centered!